The ovilus 3 spirit box Modes & Operation

The Ovilus III (Photo: S Shackleton)

the ovilus iii

Please note that the Ovilus III is now discontinued, and to buy one now even 2nd hand will be hard, those who already own one tend to keep hold of them, and when they do become available to buy, they are almost double the cost of buying one from new.

The Ovilus V is currently the newest model of the Ovilus Devices. (as of Feb 2020)

Created by Bill Chappel from Digital Dowsing, and features heavily with Zak Bagan's “Ghost Adventures Crew” series.

The Ovilus III is based on the original Ovilus and all preceding Ovilus, the Ovilus III is an ITC device.

Solely, the goal of the device is to facilitate communications with spirit.

Just like doing EVP or ITC feedback, nothing is instant or guaranteed to produce results.

The Ovilus III provides 8 different ITC modes and a Sync mode to make matching up cameras and recorders easier.

Like all Ovilus and Talker devices, the Ovilus III NEVER uses random generators.

We are writing this segment as we own and operate the Ovilus III during our investigations.

As experienced users, we are suitably qualified and can reliably comment on its use as a paranormal communication device.

Ø Dictionary Mode - Words are created out of the onboard database.

“This will be the main default mode you will use the most during your investigations, let's face it, it's why you bought this device in the first place?”

ITC, the idea is very simple, as the Ovilus III senses energy changes (The spirit using its energy to communicate with you), it configures the energy and calculates a value.

That value is used to look up a pre-programmed word. If the "value" is 100 the 100th word is spoken and displayed.

This 1 to 1 correlation never changes.

The Dictionary Mode when used will save 100 words on the screen.

To scroll through the words previously spoken, press the right arrow on the front of the device.

This is really useful if you need to review your evidence on-site in real-time.

NB: (When you turn off your device you will lose your saved words).

Ø Q & A Mode – The Q & A Mode is meant to be used as a question and answer session.

Remember the Ovilus is driven by energy so even though it may speak it doesn’t mean it’s a “message.”

You’re looking for answers that are clear, contextual, relevant, and timely.

When the red LED lights up, ask a question then press the down/right arrow to continue the display of your answers.

Ø Phonetic Mode - Speech is formed by using phonemes, the basic blocks of human speech. This is the most "talkative" mode on the Ovilus III. Most of the time, you will hear vowel and consonant sounds in jumbled order.

The device is still being driven by the environment.

The Bar across the bottom represents the change in energy the Ovilus is reacting to.

Ø Reverse Phonetic Mode – Speech is formed by using phonemes, the basic blocks of human speech then played in reverse order.

The Bar across the bottom represents the change in energy the Ovilus is reacting to.

Ø Touch Mode - The Ovilus III will make a ping sound when touched.

This mode is best used by setting the Ovilus III on a table or the floor.

Allow several minutes for the device to stabilize.

The Touch Mode will show the Bar across the bottom, this represents the change in energy the Ovilus is reacting to.

Ø Draw Mode – The device will “draw” across the screen, based on the amount of energy present.

· When the “draw” has filled up the screen, the red light on the right side of the device will illuminate.

You can press the down/right arrow (button on the right side of the faceplate) to allow the “draw” to continue or press the ENTER button to change modes.

Ø White Noise Mode – Use this mode during EVP sessions for low-level white noise.

· The line in the middle of the screen represents the energy seen on Chanel 3 of the Ovilus.

The White noise cadence is altered by changes in channel 3.

Ø Energy Scope Mode – This mode displays two channels of the Ovilus inputs. The LEDs light from left to right indicating the intensity of the signal.

· By pressing the right and left arrow, users can change the energy level the LEDs respond to.

Green LED 1 X Level, 1st Yellow 2 X level, 2 nd Yellow 4 X level, Red led 8 X level.

The intent of this mode is for those who like to use lights to do ITC communication.

Ø Utility Mode – The Utility Mode will allow you to change the settings on the device.

- Volume – Volume may be increased or decreased by pressing the up and down arrows on the front of the device.

- Pitch – Pitch may be increased or decreased by pressing the up and down arrows on the front of the device.

· Speed – Speed of speech may be increased or decreased by pressing the up and down arrows.
If you are having problems understanding your Ovilus III, you may want to slow down the speed.

· Gain – Gain may be increased or decreased by pressing the up and down arrows.

· Offset – Offset may be increased or decreased by pressing the up and down arrows.

· Lines – The Ovilus III displays up to 5 lines on the screen. You change the number of lines displayed by pressing the up and down arrows.

To exit the Utility Mode, press both arrow buttons at the same time.

Ø Sync Mode - The yellow LED lights on the front of the device will flash as the device counts down from ten to zero.

This is very helpful when setting up an investigation by placing the Ovilus III in an area where your static cameras can see it and audio recorders can hear it.

You can quickly match your audio and video files based on the "sync.”

After the Sync mode has finished, the Ovilus III will return to Dictionary mode.

Thermal Flash-light - The flash-light will change colour depending on the temperature of the area you point the device.

Moderate temperatures will illuminate a green light; warm or hot temperatures will illuminate a red light and cool or cold temperatures will illuminate a blue light. Now your eyes are a thermal camera!

· To turn ON the Thermal Flash-light, press both arrow buttons at the same time while in any mode other than Dictionary Mode.

· To turn OFF the Thermal Flash-light, press both arrow buttons at the same time while in any mode other than Dictionary Mode.

A full copy of the Ovilus III user guide can be safely downloaded from this link:

https://www.digitaldowsing.com/uploads/pdfguides/ovilusiii.pdf